Have you ever wanted to wire up your Trailer Lights without a hassle? KT’s Click N Tow Trailer Light Wiring Harness is the solution for you!
The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps.
The System is designed for a simple, easy Trailer Light Wiring Harness Installation with minimal use of tools. The system is ideal for DYI at home installations.
The Click ‘N’Tow Trailer Light Wiring Harness System for Box Trailers is available in 3 kits, each of which contain all looms and connections required to install side marker lamps, rear trailer lamps, trailer plug and licence plate lamps on 6×4 & 7×4 Box Trailers.
Kits Available to suit 6×4 & 7×4 Box Trailers:
Each pack contains all parts required to install a complete Click N Tow Trailer Light Wiring Harness on a 6×4 & 7×4 Box Trailer.
All cables are manufactured using marine tinned copper to provide durability and weather resistance. Each connection contains a waterproof gel which assists in protecting pins from dirt, dust and water.
NOTE: each of these packs do not include side markers, licence plate lamp, or trailer lamps, however the Click N Tow wiring harness is completely universal and compatible with any side marker, licence plate lamp and trailer lamp.
IMPORTANT: During installation, always ensure to install the main loom (Orange/8) down the right side of your trailer. Failure to do so will result in the left indicator to function as the right indicator and right indicator to function as the left indicator.
INSTALLING YOUR HARNESS: Installing your wiring harness is as simple as matching the product colour codes with the corresponding trailer diagram on the back of the packaging.
FREQUENTLY ASKED QUESTIONS ABOUT CLICK N TOW:
Question: How do I know that this system will suit my Trailer?
The KT Click N Tow Trailer Light Wiring Harness System will suit 6×4 & 7×4 Box trailers. If you are unsure, you can also contact one of our friendly sales team on 1300 559 953 who will be able to recommend the correct size wiring harness for you.
Question: Why should I only install the Main Loom (ORANGE/8) down the right side of my Trailer?
The Box Trailer Main Loom (ORANGE/8) is designed to be installed down the right side of the Trailer since it is designed to only operate the right indicator. To operate the second (Left) Trailer Lamp, the (PURPLE/7) Connection from Main Loom to the Second (Left) Trailer Lamp with 2 Pin Aux must be installed.
Failure to install the (ORANGE/8) Main Loom on the right side of the Trailer will result in the left indicator to function as the right indicator and the right indicator to function as the left indicator.
Question: How easy is the KT Click ‘N’ Tow Trailer Light Wiring Harness System to install?
The Click ‘N’ Tow Wiring System is designed for a DIY installation, therefore a lot of thought has been put into creating this system. The Colour Coded Guides make the installation very simple to connect the harness to the correct pieces
By matching the Colour Code on your product packaging with the below diagrams, you will very quickly identify which part of the Loom you are working with.
KT has also created video demonstrations for Both Marine Trailer and Box Trailer Installations for further support. Simply by following the steps in these videos, you will find your The Click ‘N’ Tow Wiring System, very simple and effective.
KT Click ‘N’ Tow Trailer Light Wiring Harness System For Box Trailers Video Installation Demonstration: